_________________________________________________________________5. WORKING
____________________________________________________________________________
20
CITIZEN 6 - 9/MC, CITIZEN 6+6 - 9+9/MC DIGITAL VERSION
Press
again to memorise the new time and day. When set, the dot
between hours and minutes begins to flash and the day display disappears.
5.4.2 Baking cycle programming
To program the baking cycle the oven must be on. Press the general
system on/off button
. The message “OFF” disappears from the
display and set temperature is displayed in its place.
In this condition, after selecting the desired cycle using the baking cycle
button
and once the desired number for the cycle to memorise
appears on the
display, press the timer programming button
and
hold it for at least 3 seconds.
The displays show the following:
-Oven temperature and time display
Prog
-Set
temperature
display
Cic
-Upper element control display
Off
-Lower element control display
Off
-Baking cycle selection display
No. of cycle
After 2 seconds, baking parameters can be modified according to needs.
The displays show the following:
- Oven temperature and time display
Off
- Set temperature display
Prev.
set.
- Upper element control display
Prev.
set.
- Lower element control display
Prev.
set.
- Baking cycle selection display
No. of cycle
Parameters that may be modified are:
1) Set temperature, by means of the
and
buttons;
2) Values corresponding to upper and lower power, by means of the
relative controls
,
3) The baking Timer; this parameter can be displayed on the
display by pressing the
button, and subsequently modified by
means of the
and
buttons.
