_______________________________________________7. WORKING ELECTRONIC VERSION
______________________________________________________________________________
21
CITIZEN 6 - 9/MC
7.2.Activity and inactivity state
on/off of main system
During the inactivity state the card is powered but no functions foreseen by
the system can be enabled, since the electromagnetic switch is not enabled
yet. The display
of the control panel will show the writing "OFF".
All keys on the push-button panel will be disabled, except for the key
(system ignition) and the key
.
By pressing the key
the temperature inside the baking chamber will be
shown for about 5 seconds on the display
; after this time has
elapsed, the writing "OFF" will be displayed again.
By pressing the key
the system gets into the inactivity state, the baking
cycle is started, the values relating to the latest set-temperature which has
been set will appear on the display
and the parameters used
before switching off the oven are shown on the displays
and
.
7.3.Settings
7.3.1.Setting of set-temperature
To set the desired set-temperature press the key
, then the key
making sure that the display
starts to blink showing the latest
programmed temperature.
Use the keys
and
until you read the desired baking temperature on
the display.
Once the desired value has been reached, press the key
again to enter
the datum into memory. The parameter is shown in fixed mode and the
display
relating to the oven top heating element starts to blink. You
can now proceed with setting the oven top and bottom power.
7.3.2.Setting of oven top
and oven bottom power
Press the key
until the display
relating to the oven top heating
element starts to blink showing the latest set parameter. Use the keys
and
until you read the desired parameter on the display.