ZANKER ZSK3502X, Инструкция по установке и эксплуатации

Страница: 12 / 16

27
Electrical Connection
All electrical installation work must be carried
out by a competent electrician and in accor-
dance with the applicable local regulations. In-
correct installation can lead to injury or da-
mage.
Before connecting the built-in switch box to the
glass ceramic cooking surface or hob via the
21 pole contacts, and connecting the ap-
pliance to the mains, always check that the
mains voltage and that of the appliance match.
A type HO5VV-F or higher quality cable must be used
for the mains connection cable.
A device is to be provided in the switch box installation
that enables the appliance to be isolated from the
mains with a separation of 3 mm on all poles. Suitable
devices are cut-outs, fuses and contactors.
The connection socket should be positioned such that
it is easily accessible; the cable should be at least
1.2m long so that the built-in switch box can be easily
plugged in after installation.
See enclosed wiring diagram.
Table of Combinations
Information on which cooking surfaces the switch bo-
xes can be combined with:
Switch Box Glass Ceramic Cast Hot Plates
ZSK 3502 X ZKM 3180 X
EHC 650 X
EHC 660 X
ZKM 2416 W
ZKM 2416 B
ZKM 2416 X
315
1719 17 / 02.98