ZANKER ZKS 5620 I, Инструкция

Страница: 6 / 28

Before using your dishwasher for the first time:
ensure that the electrical and water
connections comply with the installation
instructions
remove all packaging from inside the appliance
set the water softener
fill the salt container
fill the rinse aid dispenser.
Setting the water softener
The dishwasher is equipped with a water softener
designed to remove minerals and salts from the
water supply, which would have a detrimental or
adverse effect on the operation of the appliance.
The higher the content of these salts, the harder
your water is.
Water hardness is measured in equivalent scales,
for example German, French degrees, and parts
per million.
The softener should be adjusted according to the
hardness of the water in your area. Your local
Water Authority can advise you on the hardness of
the water in your area.
The dishwasher is factory set at level 2.
If this level is not suitable for your area the softener
should be adjusted.
To adjust the water softener:
With a screwdriver turn the selector on the upper
front corner of the machine until the level required
corresponds with the marker.
☞
☞
☞
☞
☞
☞
Before use
30
PBU01GB
2
AA05
1
3
5
4
2
Level Use of
salt
French
degrees
(°TH)
PPM
(Parts per
million)
German
degrees
(°dH)
0
1
2
3
4
5
<4
5-11
12-22
23-34
35-50
51-67
NO
SI
SI
SI
SI
SI
<7
8-20
21-40
41-60
61-90
91-120
0-80
81-200
201-400
401-600
601-900
901-1200
Water hardness