45
1
Safety Instructions for the Installer
•
A device must be provided in the electrical installation which allows the
appliance to be disconnected from the mains at all poles with a contact
opening width of at least 3 mm.
Suitable isolation devices include line protecting cut-outs, fuses (screw
type fuses are to be removed from the holder), earth leakage trips and
contactors.
•
In respect of fire protection, this appliance corresponds to EN 60 335-2-6.
This type of appliance may be installed with a high cupboard or wall on
one side.
•
Drawers may not be fitted underneath the hob.
•
The installation must guarantee shock protection.
•
The kitchen unit in which the appliance is fitted must satisfy the stability
requirements of DIN 68930.
•
For protection against moisture, all cut surfaces are to be sealed with a
suitable sealant.
•
On tiled work surfaces, the joints in the area where the hob sits must be
completely filled with grout.
•
On natural, artificial stone, or ceramic tops, the snap action springs must
be bonded in place with a suitable artificial resin or mixed adhesive.
•
Ensure that the seal is correctly seated against the work surface without
any gaps. Additional silicon sealant must not be applied; this would make
removal more difficult when servicing.
•
The hob must be pressed out from below when removed.
Содержание ZKM 3180 X
Страница 22: ...90 Assembly Montage...
Страница 23: ...91...
