18
electrolux
18
6)
place the door on a stable surface (Fig. 4)
protected by a soft cloth to prevent the handle
surface from being damaged;
7)
release the locking system to remove the inter-
nal panes of glass (Fig. 5);
8)
turn the 2 fasteners 90° and extract them from
their seats (Fig. 6);
9)
gently lift and carefully take off the uppermost
pane marked by a decorative frame on 4 sides
(Fig. 7).
Clean the oven door with lukewarm water and a soft
cloth. Do not use products such as scouring pads,
steel wool, abrasive sponges or acids because
they could damage the special heat-reflecting sur-
face of the internal panes of glass.
After cleaning, reassemble the panes in the door
and then the oven door, following the procedure
described above in reverse. Make sure you repo-
sition the panes correctly.
To perform this operation correctly, proceed as
follows:
- the decorated internal pane with a frame on the 4
sides must be reassembled so that the screen-
printing is facing outwards. The side of the pane of
glass is correct if you do not feel any roughness
near the screen printing when you pass your
fingers over the surface.
Fig. 5
Fig. 6
Fig. 4
90°
