IF THE MACHINE DOES NOT WORK
Before consulting the technical assistance service, check that the following operations
have been carried out. This may lead to a saving in both time and money.
Check that:
1) The power supply is available at the mains.
2) The plug is inserted correctly in the socket.
3) The programmer knob (P) is pulled out, or the start pushbutton (if fitted) is pressed*.
4) The door is closed.
5) Consult the techinical assistance service.
Check that:
1) The programmer knob (P) is on the selected programme.
2) Refer to problem "Does not take in water".
Check that:
1) Water is present in the supply system.
2) The tap is turned on.
3) The water feed hose is not kinked.
4) With the power disconnected, clean the inlet filter located between the tap and the
discharge hose**.
5) Consult the technical assistance service.
Check that:
1) The discharge hose is at the correct height (60-90 cm)***.
2) The discharge hose outlet is not under water.
3) Consult the technical assistance service.
Check that:
1) The discharge hose is positioned correctly
2) The discharge hose is not kinked.
3) The detergent dose is not excessive.
4) The soap powder container is not blocked.
5) The detergent is the correct type for a washfing machine.
Check that:
1) Large articles (sheets, tablecloths, etc.) are not tangled or folded.
2) The washing machine is standing correctly on its feet
A
*.
3) The four packing screws and distance pieces have been removed
A
**.
1) Wafit 3 minutes after the programme has finished.
Check that:
1) The programme has been chosen correctly*.
2) The water tap is turned on.
3) The discharge filter is clean.
4) The washing load is right
A
***.
5) Consult the technical assistance service.
Try to start the machine to see whether the problem has been solved.
If the problem persists, call for technical assistance service (Fig. 43) quoting:
1) The type of malfunction.
2) The model.
3) The serial number of the machine displayed on the mameplate fitted on the inside
of the filter hatch.
10
Does not
discharge water
and does not spin
* See "Use of the machine" (page 6)
** See fig. 7 (page 4)
*** See fig. 8 (page 4)
A
*
See fig. 4 (page 4)
A
**
See fig. 3 (page 4)
A
*** See Program tables (page 11-12)
service
pump W
model
220 V
N
°
204276237
kg wash
kg dry
A
total w
heating wash W
heating dryer W
wash motor W
spin motor W
dryer motor W
Hz
5 / 100 N/cm
2
Fig.43
The door
does not open
Does not dry
Vibrates
or is noisy
Takes in and
discharges water
continuously
Does not work
(indicator light off)
Does not work
(indicator light on)
Does not
take in water
