5
Warning :
Open hot water faucet for a few minutes until water flow
is continuous and all air is purged from water pipes.The unit’s
plastic cover must be installed before the circuit breaker is
turned on.
Handing over the unit
Explain to the user how the unit works and familiarise him or
her with its use.
- Advise the user about possible hazards (high water
temperature)
- Hand over these instructions, to be kept in a safe place.
1.9 Service note
When carrying out any work, isolate the unit from the
mains and shut off the water connection.
- Clean the filter
Disconnect the union nut, remove washer , filter and clean.
Re-assemble in reverse order.
1.10. Warning
When selecting the temperature at the draw off fitting,
high water temperatures may be reached. Children,
especially, should be kept from the fitting due to the risk of
scalding.
System design
Closed
Rated pressure
10 bar/1.0Mpa
Nominal capacity
L.
≤
0.25
Dimension (H x W x D)
mm.
220 x 170 x 80
Weight (empty)
kg.
1.4
Electrical connection
1/N/PE~220...230 V.
Power Regulating device
4 steps control (Off - Low - Med - High)
Rated power (kW) - Rated current (A)
kW - A
220 V
6.0 - 27.3
230 V
6.6 - 28.7
Reccommended circuit breaker
(A)
30
Reccommended cable size
(Sqmm.)
6.0
Water connections (surface installation)
G ½”
Technical data
MET 60
Содержание MET 60
Страница 7: ......
Страница 8: ...G E R M A N Y...