
Operation - for users and contractors
28
2.3 CE designation
The CE designation shows that the appliance meets all
essential requirements, in line with:
º Low Voltage Directive
º Electromagnetic Compatibility Directive
The maximum permissible mains impedance is indi-
cated in chapter "Specification / Data table".
2.4 Test symbols
See type plate on the appliance.
Country-specific approvals and certifications:
Germany
In line with [German] State Building Regulations, a
general test certificate has been issued for these ap
-
pliances, as
verification of their suitability regarding
noise emissions.
ZANKER
HOL
DIN 4109
P-IX 7511-I
3. Appliance description
The hydraulically controlled small instantaneous water
heater heats the water directly at the draw-off point.
The heating system starts automatically when the tap is
opened
.
The short pipe runs ensure that energy and water
losses are minimal.
The DHW output depends on the cold water temperature,
the heating output and the flow rate.
The bare wire heating system is suitable for hard and soft
water areas.
This heating system has a low susceptibility
to scale build-up.
The heating system ensures quick and
efficient DHW provision at the washbasin.
Fitting the special aerator supplied provides an optimum
water jet.
Содержание MDG 35
Страница 43: ...43 Notes...