ZANKER KWF 71411 WE, Руководство пользователя

Страница: 9 / 32

Tie the plastic hose guide to the tap with a string to
prevent that the drain hose unhooks when the appli-
ance is emptying.
• Onto a sink outlet spigot.
Push the drain hose onto the spigot and secure with
a clip, ensure a loop is formed in the drain hose to
prevent waste from the sink entering the appliance.
If the outlet spigot has not been used before, remove
any blanking plug that may be in place.
•
Directly into a drain pipe at a height of not less
than 60 cm and not more than 100 cm.
MAX 100cm
The end of the drain
hose must always be
ventilated , i.e. the inside
diameter of the drain pipe
must be larger than the
outside diameter of the
drain hose. The drain
hose must not be kinked.
• Directly to a built-in drain pipe in the room wall.
The drain hose may be extended to a maximum
of 4 metres. An additional drain hose and joining
piece is available from your Local Centre.
Connections overview
~max.400 cm
min. 60 cm
max. 100 cm
0.5 bar (0.05 MPa)
8 bar (0.8 MPa)
min.
60 cm
max.
100 cm
9