ZANKER KWF 71411 WE, Руководство пользователя

Страница: 24 / 32

• Unscrew the hose
from the appliance.
Keep a towel nearby
because some water
may flow.
• Clean the filter in the
valve with a stiff brush
or with the piece of
cloth.
• Screw the hose back to the appliance and make
sure the connection is tight.
• Turn on the water tap.
What to do if…
The appliance does not start or stops during operation.
Certain problems are due to lack of simple mainte-
nance or oversights, which can be solved with the help
of the indications described in the charts, without calling
out an engineer.
During appliance operation it is possible that the
red
pilot light of the button 9 flashes, the display shows a
fault code and the buzzer sounds to indicate that the
appliance is not working.
Before contacting your local Service Centre, please
carry out the checks listed below.
Fault code and malfunc-
tion
Possible cause / Solution
Problem with the water
supply
The water tap is closed.
• Open the water tap.
The inlet hose is squashed or kinked.
• Check the inlet hose connection.
The filter in the inlet hose or the inlet valve filter are blocked.
• Clean the water inlet filters (read "Cleaning the water inlet filters" for more de-
tails).
24