ZANKER KTAK14FS1, Руководство пользователя

Страница: 16 / 40

Problem Possible cause Solution
Door was not closed completely. Make sure the door is closed
completely.
Stored food was not wrapped. Wrap food in suitable packaging
before storing it in the appliance.
Water flows inside the refrigera‐
tor. Food products prevent the water
from flowing into the water collec‐
tor. Make sure that food products do
not touch the rear plate.
The water outlet is clogged. Clean the water outlet.
Water flows on the floor. The melting water outlet is not
connected to the evaporative tray
above the compressor. Attach the melting water outlet to
the evaporative tray.
Temperature cannot be set. The "FastFreeze function" is
switched on. Switch off "FastFreeze function"
manually, or wait until the func‐
tion deactivates automatically to
set the temperature. Refer to
"FastFreeze function" section.
The temperature in the appliance
is too low/too high. The temperature is not set cor‐
rectly. Set a higher/lower temperature.
The door is not closed correctly. Refer to "Closing the door" sec‐
tion.
The food products' temperature is
too high. Let the food products tempera‐
ture decrease to room tempera‐
ture before storage.
Many food products are stored at
the same time. Store less food products at the
same time.
The thickness of the frost is
greater than 4-5 mm. Defrost the appliance.
The door has been opened often. Open the door only if necessary.
The FastFreeze function is
switched on. Refer to "FastFreeze function"
section.
Some specific surfaces inside the
fridge compartment are warmer
at some times. This is a normal state.
Temperature setting LEDs flash
at the same time. An error has occurred in measur‐
ing the temperature. Contact the nearest Authorised
Service Centre. The cooling sys‐
tem will continue to keep food
products cold, but temperature
adjustment will not be possible.
16 ENGLISH