ZANKER KOU20611, Руководство пользователя

Страница: 13 / 36

• To clean metal surfaces, use a usual cleaning
agent.
• Clean the appliance interior after each use. Fat
accumulation or other food remains may result in a
fire.
• Clean stubborn dirt with a special oven cleaner.
• Clean all accessories after each use and let them
dry. Use a soft cloth with warm water and a cleaning
agent.
• If you have nonstick accessories, do not clean them
using aggressive agents, sharp-edged objects or a
dishwasher. It can cause damage to the nonstick
coating.
Stainless steel or aluminium appliances
Clean the oven door with a wet sponge
only. Dry it with a soft cloth.
Do not use steel wool, acids or abrasive
materials as they can damage the oven
surface. Clean the oven control panel
with the same precautions.
Cleaning the door gasket
• Regularly do a check of the door gasket. The door
gasket is around the frame of the oven cavity. Do
not use the appliance if the door gasket is damaged.
Contact an Authorised Service Centre.
• To clean the door gasket, refer to the general
information about cleaning.
Cleaning the oven door
The oven door has two glass panels. You can remove
the oven door and the internal glass panel to clean it.
The oven door can close if you try to
remove the internal glass panel before
you remove the oven door.
Caution! Do not use the appliance
without the internal glass panel.
1
Open the door fully and
hold the two door hinges.
1
2
Lift and turn the levers on
the two hinges.
2
3
Close the oven door
halfway to the first
opening position. Then
pull forward and remove
the door from its seat.
3
4
Put the door on a soft
cloth on a stable surface.
4
5
Release the locking
system to remove the
internal glass panel.
5
90°
6
Turn the two fasteners by
90° and remove them
from their seats.
6
2
1
7
First lift carefully and
then remove the glass
panel.
7
Clean the glass panel with water and soap. Dry the
glass panel carefully.
When the cleaning is completed, install the glass panel
and the oven door. Do the above steps in the opposite
sequence.
The screen-printing zone must face the inner side of the
door. Make sure that after the installation the surface of
the glass panel frame on the screen-printing zones is
not rough when you touch it.
Make sure that you install the internal glass panel in the
seats correctly.
13