ZANKER KEI8740XXK, Руководство пользователя, Страница: 7 / 36

Daily use
Warning! Refer to Safety chapters.
Activating and deactivating
Touch for 1 second to activate or deactivate the
hob.
Automatic Switch Off
The function deactivates the hob automatically if:
• all cooking zones are deactivated,
• you do not set the heat setting after you activate the
hob,
• you spill something or put something on the control
panel for more than 10 seconds (a pan, a cloth,
etc.). An acoustic signal sounds and the hob
deactivates. Remove the object or clean the control
panel.
• the hob gets too hot (e.g. when a saucepan boils
dry). Let the cooking zone cool down before you use
the hob again.
• you use incorrect cookware. The symbol comes
on and the cooking zone deactivates automatically
after 2 minutes.
• you do not deactivate a cooking zone or change the
heat setting. After some time comes on and the
hob deactivates.
The relation between the heat setting and the time
after which the hob deactivates:
Heat setting The hob deactivates af-
ter
, 1 - 2
6 hours
3 - 4 5 hours
5 4 hours
6 - 9 1.5 hour
The heat setting
To set or change the heat setting:
Touch the control bar at the correct heat setting or move
your finger along the control bar until you reach the
correct heat setting.
Bridge function
The function operates when the pot
covers the centres of the two zones.
This function connects two left side cooking zones and
they operate as one.
First set the heat setting for one of the left side cooking
zones.
To activate the function: touch . To set or change
the heat setting touch one of the control sensors.
To deactivate the function: touch . The cooking
zones operate independently.
Automatic Heat Up
Activate this function to get a desired heat setting in a
shorter time. When it is on, the zone operates on the
highest setting in the beginning and then continues to
cook at the desired heating setting.
To activate the function the cooking zone
must be cold.
To activate the function for a cooking zone: touch
( comes on). Immediately touch a desired heat
setting. After 3 seconds comes on.
To deactivate the function: change the heat setting.
Power function
This function makes more power available to the
induction cooking zones. The function can be activated
for the induction cooking zone only for a limited period
of time. After this time the induction cooking zone
automatically sets back to the highest heat setting.
Refer to “Technical information” chapter.
To activate the function for a cooking zone: touch
. comes on.
7