ZANKER GE 66005, Руководство пользователя

Страница: 14 / 36

Problem Possible cause Possible solution
The filters are dirty or not assem-
bled and installed correctly. Make sure that the filters are clean
and correctly assembled and instal-
led.
The quantity of detergent was not
sufficient or missing. Make sure that the quantity of de-
tergent is sufficient.
Limescale particles on the dishes. The salt container is empty. Fill the salt container with dishwash-
er salt.
Incorrect water softener adjust-
ment Adjust the water softener.
The salt container cap is not closed
correctly. Make sure that the salt container
cap is closed correctly.
There are streaks, milky stains, or
a bluish layer on glasses and
dishes. Rinse aid dosage is too high. Decrease the rinse aid dosage.
Dry water drop stains on glasses
and dishes. Rinse aid dosage is too low. Increase the rinse aid dosage.
The detergent can be the cause. Use a different brand of detergent.
The dishes are wet. You have set a washing pro-
gramme without drying phase or
with a decreased drying phase. Let the door stay ajar for some mi-
nutes before you remove the
dishes.
The dishes are wet and dull. The rinse aid dispenser is empty. Fill the rinse aid dispenser with rinse
aid.
Technical data
Dimensions Width 600 mm
Height 850 mm
Depth 610 mm
Water supply pressure Minimum 0,5 bar (0,05 MPa)
Maximum 8 bar (0,8 MPa)
Water supply
1) Cold water or hot water maximum 60 °C
Capacity Place settings 12
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
The rating plate on the inner edge of the appliance
door shows the electrical connection data.
If the hot water comes from alternative sources
of energy, (e.g. solar panels, photovoltaic panels
and aeolian), use a hot water supply to decrease en-
ergy consumption.
14