Zane zTrack Tube, Руководство по эксплуатации

Страница: 8 / 9

www.zane.hu
8
zTrack Config tool for firmware upgrade
Requirements

USB type A cable with micro USB

To get proper firmware file for the zTrack Tube : https://ztrackmap.com/support/

zTrack Config Tool software
Download the zTrack configuration tool from
https://ztrackmap.com/support/
compressed file: setup_zTrack_Configuration_Tool_1031.rar
Unpack file and after unzip the bootloader: en.stsw-stm32080.zip
Install: DfuSe_Demo_V3.0.5_Setup.exe

Connect zTrack to Config Tool and click “Perform device firmware upgrade”

Windows is installing correct USB driver for DFU device

If zTrack is not detected by zTrack Configuration Tool follow the instructions below:
o
Run the device manager of Windows and find the USB device "DFU in FS Mode"
o
Right click on the device and select "Uninstall device"
o
When the Uninstall Device window appears check the "Delete the driver software for
this device" and click "Uninstall"
o
Disconnect the device
o
Connect the device to the PC again.

Browse the proper firmware file and upload it.