www.zane.hu
4
Device Parameter
Value
Description
Motion sensor status
Enabled/Disabled
Enable to wake up sensor by
acceleration. If no movement
sensor switches to sleep mode
after “Tracking time” is
elapsed.
GPS status
Enabled/Disabled
Start / Stop GPS
Motion sensor sensitivity
Lvl 1 up to Lvl 9
Sensitivity of accelerometer
default: Lvl 2 = very sensitive
GPS accuracy
10 … 60 seconds
Position average measured
over “GPS accuracy” time
GPS time
0 … 900 seconds
Time to get stable GPS position
data. If no GPS signal is
received for “GPS time”,
tracker sends message
“motion detected”
Tracking time
5 … 1800 seconds
Tracking interval to send GPS
position
Keepalive time
3600 … 21600 seconds
If no acceleration, sending
keepalive packets to gateway.
Cycle time 60 minutes by
default, max. 6 h
Perform factory reset
