TECH SUPPORT
541-728-0924
PV open circuit voltage up to 100V
The latest Maximum Power Point Tracking (MPPT) algorithm
Unique multiple peaks detected technology for maximum power point tracking
MPPT tracking efficiency above 99.5%
Wider MPP operating voltage range
Common negative grounding connection
Suitable for most rechargeable batteries, up to 9 battery types preset plus custom setting
Extensive internal electronic circuit protection
Reliable operatIng safety protection overcharging or undercharging protection, short circuit
protection, reverse polarity protection, thermal protection
Automatically detect 12V or 24V DC system voltages.
Informative display Interface to show Solar parameter, battery charging parameter, battery type,
battery temperature, custom presetting and faulty codes
(Optional) Provides plug in remote digital display meter.
(Optional) Provides external battery temperature sensor.
Splash proof IP43 Rated
Rubber mask for connecting terminals protection
Conformal coating for internal boards
Designed according to UL1741, EN/IEC 62109 1 ; EMI standard : EN61000 61/EN61000 63 and FCC
standard: 47 CFR Part 15, Subpart B
This charger is designed for indoor use only and should never be exposed to rain.
Do not disassemble the controller. Contact Zamp Solar support if the unit requires attention.
Lead acid, LCO, LiFePO4, LTO, LI-95 batteries can be dangerous. Ensure no sparks or flames are
present when working near batteries.
Eye protection should always be used. Never short circuit the battery.
Given sufficient light solar panels always generate energy even when they are disconnected.
Accidental ‘shorting’ of the terminals or wiring can result in sparks causing personal injury or a
fire hazard. We recommend that you cover up the panel(s) with cloth or cardboard so you can
block all incoming light during the installation. This will ensure that no damage is caused to the
Solar Panel or Battery if the wires are accidentally short circuited.
Always install a battery fuse on each circuit including the solar controller
Do not reverse connect the wires to the solar panel or battery
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
FEATURES
WARNING
RISK OF EXPLOSIVE GASES WORKING IN VICINITY OF A LEAD ACID BATTERY.
DANGEROUS EXPLOSIVE GASES DEVELOP DURING NORMAL BATTERY OPERATION.
!
WARNINGS
