13
Item
System functions
Options
Notes
1
LANGUAGE
Selects the
display interface
language.
Choose the language: PL, EN, DE, FR, RU
2
DO NOT DISTURB
ENABLED
The LED will flash if this mode is enabled.
DISABLED
The mode is disabled by default during a call from
an entrance panel, display-to-display intercom
(internal) calls and the public address mode.
3
CAN BE
MONITORED
ENABLED
This display can be monitored (listened to) by
other displays in the video entry phone system
if this option is set to ENABLE.
DISABLED
The mode is disabled by default.
4
OPENING
ENABLED
Touch
to unlock the electric strike linked to
the entrance panel. Touch
to open the gate
linked to the entrance panel.
DISABLED
When this function is disabled, touching
followed by
/
will open the door or the
gate linked to the entrance panel.
5
PORT STATE
DOOR 1 / DOOR 2 / CCTV1 / CCTV2
6
DEVICE ADDRESS
Room 1/2/3/4
Choose ROOM 1 on the display that should be
the main (master) display of the system. The
setting will be yellow if the same device address
is set in two displays in the video entry phone
system.
7
RESTORE
DEFAULT
ENTER
Restores the default factory settings of this
display.
8
FORMAT FLASH
ENTER
Formats the embedded flash memory of this
display.
9
FORMAT SD CARD
ENTER
Formats the microSD card installed in the
display.
10
COPY FILE TO SD
CARD
ENTER
Copies all files from the embedded flash memory
to the microSD card in the display.
11
AUTO CAPTURE
QUANTITY
00, 01
00: FUNCTION DISABLED
Image capture;
01: Automatic capture of 1 picture during a call.
12
AUTO LEAVING
MESSAGE
ENABLED
The visitor calling with an entrance panel can
leave a voice message after an Out-of-Home
Reply and tone.
DISABLED
Disables this mode.
13
SCREENSAVER TIME
30 s, 1, 2, 3, 5, 10, 20, 30, 40, 50, 60 min
14
FIRMWARE VERSION
Displays the version of the firmware installed on
the display.
Switch the option setting with ◄ / ►.