Zamel VP-809B, Руководство пользователя, Страница: 75 / 80

14
Item System functions Options Note
1 LANGUAGE Selects the
display interface
language. Choose the language: PL, EN, DE, FR, RU
2 DO NOT DISTURB ENABLE The LED will flash if this mode is enabled.
DISABLE The mode is disabled by default during a call from an
entrance panel, display-to-display intercom (internal)
calls and the public address mode.
3 CAN BE MONITORED ENABLE This display can be monitored (listened to) by other
displays in the video entry phone system
if this option is set to ENABLE.
DISABLE The mode is disabled by default.
4 MONITOR UNLOCK ENABLE Touch to unlock the electric catch linked to the
entrance panel. Touch to open the gate linked to
the entrance panel.
DISABLE
When this function is disabled, touching followed
by will open the door or the gate linked to the
entrance panel.
5 PORT STATE None / CCTV1 / CCTV1&2
6 DEVICE ADDRESS Room 1/2/3/4 Choose ROOM 1 on the display that should be the main
(master) display of the system. The setting will be
yellow if the same device address is set in two displays
in the video entry phone system.
7 RESTORE DEFAULT ENTER Restores the default factory settings of this display.
8 FORMAT FLASH ENTER Formats the embedded flash memory of this display.
9 FORMAT SD CARD ENTER Formats the microSD card installed in the display.
10 COPY FILE TO SD
CARD ENTER Copies all files from the embedded flash memory to the
microSD card in the display.
11 AUTO CAPTURE
QUANTITY 01, 02, 03 Automatically captures 1, 2 or 3 video feed snapshots
during a call from an entrance panel.
12 AUTO LEAVING
MESSAGE ENABLE The visitor calling with an entrance panel can leave a
voice message after the Away-from-Home Reply and
tone.
DISABLE Disables this mode.
13 SCREENSAVER TIME 30 s, 1-3 min, 5, 10, 20, 30, 40, 50, 60 min
14 FIRMWARE VERSION Displays the version of the firmware installed on the
display.
Switch the option setting with ◄ / ►.