OPENING
Place the ID card close to the card reader. The Open LED will switch on and the buzzer will sound once.
OPENING TIME
The opening time default setting is 1 second. The time setting can be adjusted with the video entrance phone display. The card
reader will use the new opening time set with the display.
REGISTERING A NEW ID CARD
A single entrance panel can be linked to a total of 20 ID cards. The operating procedures are intuitive with the light and sound
indicators. The ID card readout distance from the card reader is 3 cm. Registering and unregistering ID cards requires the
MASTER card. Keep your MASTER card safe from unauthorized use and damage. The ID card system frequency is 125 KHz /
Wiegand 26.
AUTHORIZING THE MASTER CARD
When the entrance panel is used for the first time, the call button LED will switch on and the buzzer will sound steadily. Place an
ID card close to the card reader. This card will be authorized as the MASTER card by the entrance panel. The buzzer will then
stop. Any ID card can be authorized as a MASTER any time.
ADDING USER ID CARDS
Place the MASTER card close to the card reader. Now place the new ID card close to the card reader to be registered. Place the
MASTER card close to the card reader again to exit the ID card addition mode. The button LED will continue to flash until you
exit the ID card addition mode. If the ID card addition mode is on without any interaction with the cards for 40 seconds, it will
switch off.
UNREGISTERING THE MASTER AND ID CARDS
To unregister all ID cards from the entrance panel, move the MASTER card in and out of the card reader range four times. The
buzzer will sound and the button LED will flash. When the ID cards are unregistered, you can authorize a new MASTER card
immediately.
WIEGAND 26 READER
The entrance panel can be operated as a Wiegand 26 device. This requires disconnecting the Wiegand 1 wire (blue) and the
common (GND) wire (brown). The ID card operability is disabled in the Wiegand 26 device mode.
CAUTION:
If the MASTER card is lost, remove the back plate of the entrance panel and press the RST button beneath to restore all default
settings. This will unregister all ID cards for the entrance panel. Follow the procedures above to register your new MASTER and
ID cards.
WARRANTY
24-month commercial warranty given by the manufacturer
Reseller's stamp and signature with date of sale:
1. ZAMEL Sp. z o.o. grants a 24-month warranty for the goods it sells.
2. The warranty given by ZAMEL Sp. z o.o. does not cover:
a) mechanical damage caused by transport, loading/unloading or other circumstances;
b) damage caused by improper installation or operation of the goods manufactured by ZAMEL Sp. z o.o.;
c) damage caused by any modifications made by the BUYER or any third party to the sold goods or to the equipment
required for the proper functioning of the sold goods;
d) damage caused by any force majeure event or another fortuitous event beyond any reasonable control of ZAMEL Sp. z
o.o.;
e) the power supply (batteries) included (if any) with the device as sold.
3. The BUYER shall make all warranty claims in writing at the point of sale or to ZAMEL Sp. z o.o.
4. ZAMEL Sp. z o.o. will examine each warranty claim as regulated by the applicable provisions of the Polish law.
5. The form of warranty claim resolution, i.e. replacement, repair or refund of the price of purchase, shall be decided by ZAMEL
Sp. z o.o.
6. This warranty is only effective on the following territories: Republic of Poland.
7. This warranty does not exclude, limit or suspend any rights of the BUYER arising from the statutory or regulatory laws
concerning implied warranty for defects of sold goods.
