Zamel Extra Free RZB-02, Руководство пользователя

Страница: 10 / 40

COOPERATION AND OPERATING RANGE
* 1-channel transmitters do not cooperate with roller blind controllers
CAUTION: The given range concerns open area - an ideal condition without any
natural or artificial obstacles. If there are some obstacles between a transmitter
and a receiver, it is advisable to decrease the range according to: wood and plaster:
from 5 to 20 %, bricks: from 10 to 40 %, reinforced concrete: from 40 to 80 %, metal:
from 90 to 100%, glass: from 10 to 20 %, Over- and underground medium and high
electrical power lines, radio and television transmitters, GSM transmitters set close
to a device system have also a negative influence on the range.
RDP-01 ROP-02 ROB-01 SRP-02 SRP-03 RWG-01 ROM-01 ROM-10 RDP-01 RTN-01
RNK-02 180 m 200 m 200 m 200 m 200 m 250 m 250 m 250 m 180 m 250 m
RNK-04 180 m 200 m 200 m 200 m 200 m 250 m 250 m 250 m 180 m 250 m
P-256/8 230 m 250 m 250 m 250 m 250 m 300 m 300 m 300 m 230 m 300 m
P-257/4 (2) 180 m 200 m 200 m 200 m 200 m 250 m 250 m 250 m 180 m 250 m
RNM-10 230 m 250 m 250 m 250 m 250 m 300 m 300 m 300 m 230 m 300 m
RNP-01 160 m 180 m 180 m 180 m 180 m 200 m 200 m 200 m 160 m 200 m
RNP-02 160 m 180 m 180 m 180 m 180 m 200 m 200 m 200 m 160 m 200 m
RNL-01 160 m 180 m 180 m -* -* 200 m 200 m 200 m 160 m 200 m
RTN-01 200 m 200 m 200 m 200 m 200 m 250 m 250 m 250 m 200 m 250 m
RCR-01 160 m 180 m 180 m -* -* 200 m 200 m 200 m 160 m 200 m
RXM-01 230 m 250 m 250 m 250 m 250 m 300 m 300 m 300 m 230 m 300 m
1. Press PROG push-button of RDP-01 device for a longer time.
2. After 5 seconds LED red diode switches on (signal pulsateas) and then it switches off.
3. Release the push-button in RDP-01 - MEMORY IS DELETED.
RADIO TRANSMITTERS DELETION
TIME PROGRAMMING
1. Press PROG push-button of RDP-01 device for a longer time till LED red diode switches
on (constant signal). Next release PROG push-button. Wait (for about 5 seconds) till LED
red diode switches on (first signal pulsates, next the signal is constant).
2. Press PROG push-button of RDP-01 device and then release it. LED red diode
switches off and then switches on (signal pulsates). Every LED diode pulse equals 1
second.
3. After the adjusted time is finished (the number of LED red diode flashes) press PROG
push-button and then release it - TIME IS ADDED.
Maximum time is 18 hours.
2. Press and then release transmitter’s push-button.LED red diode switches on (first
signal pulsates, next the signal is constant).
3. Press and release the same transmitter’s push-button. LED red diode switches on
(signal pulsates) and then switches off - THE TRANSMITTER IS ADDED.
CAUTION: Every transmitter can cooperate with RDP-01 in a different mode, de-
pending on how they were added to the device. One transmitter can be added
during one programming cycle. Full memory is signalled with pulsating LED red
diode.