background image

plik: inst_ext_gb_rtm-02 | modyfikacja: 03.01.2014

MOUTING, OPERATION

APPLICATION

DIMENSIONS

PRODUCT FAMILY

The RTM-02 temperature regulator is a

member of the RTM family.

1.  Disconnect  the  electric  network  by 

means  of  an  appropriate  cut-off, 

current-limiting  circuit-breaker  or 

separator.

2.  Check if there is no any voltage 

between power leads by means of 

an appropriate gauge.

3.  Mount the 

RTM-02

 module on TH 35 

rail.

4.  Connect the system leads according 

to the electrical diagram.

5.  Connect power supply circuit.

The device is ready to work just right 

after  its  appropriate  connecting.  The 

system  controls  temperature  near  the 

external  NTC  probe.  When  temperature 

drops below T

-  ∆T  temperature,  the 

regulator will switch ON the output relay 

(11 – 14 contacts shorted) and the relay 

load  (e.g.  heater).  The  heater  will  be 

ON  until  the  temperature  reaches  T

∆T. The temperature hysteresis is about 

∆T ~ 1 

o

C. The hysteresis is needed for 

decreasing relay switching frequency.

NTC temperature sensor connecction 

signalization:

•  sensor input open- green LED diode 

pulses once a second,

•  sensor  input  closed  -    green  LED 

diode pulses three times a second,

•  sensor  properly  connected  -  green 

LED diode illuminates constantly.

WARRANTY CARD

There is 24 months guarantee on the product

Salesman stamp and signature, date of sale

1. ZMIE ZAMEL SP. J. assures 24 months guarantee for the product.

2. The manufacturer’s guarantee does not cover any of the following actions:

a) mechanical damage during transport, loading / unloading or under other circumstances,

b) damage caused by incorrect product mounting or misuse,

c) damage caused by unauthorised modifications made by the PURCHASER or any third parties to the product or any other devices 

needed for the product functioning, 

d)  damage caused by Act of God or any other incidents independent of the manufacturer.

3. The PURCHASER shall lay any claims in writing to the dealer or ZMIE ZAMEL SP. J.

4. ZMIE ZAMEL SP. J. is liable for processing any claim according to current Polish legislation.

5. ZMIE ZAMEL SP. J. shall process the claim at its own discretion: product repair, replacement  or money return. 

6. The manufacturer’s guarantee is valid in the Republic of Poland.

7. The PURCHASER’s  statutory rights in any applicable legislation whether against the retailer arising from the purchase contract or 

otherwise are not affected by this warranty.

CONNECTION

TIME DIAGRAMS

INNER DIAGRAM

Floor heating system.

heating

μC

L

N

L

N

Device version:

01 - basic

02 - extended

20 - with the LCD display

30 - extended with 

the LCD display

Device type

Отзывы: