CONNECTION
RELAY CAPACITY
INNER DIAGRAM
TIME COURSE
MOUNTING, FUNCTIONING
1. Isolate from power the wiring system
to be connected with this product with
its circuit breaker, overcurrent device or
disconnector, as applicable.
2. Use a suitable tester to verify that the
isolated power input wiring is not live.
3. Install the PMM-02 on a DIN Rail in the
respective switchboard.
4. Connect the wiring to the terminals, see
the applicable wiring connection dia-
gram.
5. Turn on the power of the connected wir-
ing system.
6. Set the desired power threshold and
power load trip-off delay.
The control circuit limits the controlled
power load. When the total power load
demand on the controlled power line is be-
low the power threshold setting, the power
loads remain on the rated supply voltage.
When the power load demand exceeds the
power threshold setting, the power load line
is isolated from voltage (powering down the
controlled power loads). The supply voltage
is reapplied to the power loads to test the
power load value when the set trip-on delay
expires. Following this power load test, the
control circuit determines if the supply volt-
age should be reapplied or the power loads
left off. Fine-tune the power threshold after
approximately 40 minutes of operation.
APPLICATION
DIMENSIONS
PRODUCT FAMILY
WARRANTY CARD
There is 24 months guarantee on the product
Salesman stamp and signature, date of sale
The power limiter can support a staircase lighting timer to form a timer-controlled lamp
power system with a power load limit. Having determined the power load demand in the
control system and with the power limiter’s power threshold set, the system prevents con-
nection and operation of illegal power loads with the control system. Hence, if there is a
power overload which exceeds the power threshold, the power limiter isolates the supply
voltage from the controlled power line and periodically retest the power demand for com-
pliance with the power threshold setting.
The PMM-02 is a model from the PMX range
of power limiters.
PMM-02
ASM-01
PMX - 02
Product version
Product type code
Enclosure type:
M – single-module
H – water-tight
1. ZAMEL provides a two-year warranty for its products.
2. The ZAMEL warranty does not cover:
a) mechanical defects resulting from transport, loading / unloading or other circumstances
b) defects resulting from incorrect installation or operation of ZAMEL products;
c) defects resulting from any changes made by CUSTOMERS or third parties, to products sold or equipment necessary for the correct
operation of products sold;
d) defects resulting from force majeure or other aleatory events for which ZAMEL is not liable;
e) power supply (batteries) to be equipped with a device in the moment of sale (if they appear);
3. All complaints in relation to the warranty must be provided by the CUSTOMER in writing to the retailer after discovering a defect.;
4. ZAMEL will review complaints in accordance with existing regulations.;
5. The way a complaint is settled, e.g. replacement of the product, repair or refund, is left to the discretion of ZAMEL.
6. Guarantee does not exclude, does not limit, nor does it suspend the rights of the PURCHASER resulting from the discrepancy be-
tween the goods and the contract.
10s ÷ 90s
10s ÷ 90s
10s ÷ 90s
0,25s
0,25s
PMM-02
ASM-01
ASM-01
