EXTA FREE CONTROLLER EFC-02 MINI
MANUAL INSTRUCTION
ZAMEL
Sp. z o.o.
ul. Zielona 27, 43-200 Pszczyna, Poland
Tel. +48 (32) 210 46 65, Fax +48 (32) 210 80 04
www.zamel.com
, e-mail: [email protected]
plik: inst_ext_en_efc-02 | modyfi kacja: 22.05.2014
SOFTWARE UPDATE OF CONTROLLER
ACTIVE TABS IN THE PROGRAM FOR EFC-02
LIMITATIONS
Software updates in the EFC-02 is made from a PC.
In order to update the software you needs:
1. Download the current version of the software from the www.zamel.com or www.extafree.pl.
2. Connect the controller EFC-02 into a PC’s USB port.
3. Controller will report to the system as external memory by ZAMEL UPGRADE DISC
4. In order to update the software, remove the file *. bin directory located on the ZAMEL UPGRADE DISC and then copy a new file.
5. After finishing copy process you need disconnect the controller from the PC.
6. The software is updated.
TRANSMITTERS
Collection of all virtual transmitters used to control receivers of EXTA FREE system what was installed in your house. The appearance of transmit-
ters alludes to physical transmitters system.
HOUSE
Allows you to split the whole house system level - living room - the device. Tab allows for simple and clear management of all the devices in the
house to associated with the receivers EXTA FREE.
SCENES
Allows you to define the specific sequence of events that you want to performing simultaneously or set delays. Scenes can be launched from the
application or physical transmitter EXTA FREE..
TIMED OPERATION
Allows you to define the specific sequence of events that you want to perform at a specific time, day of week, month, or sequentially. Timed oper-
ations bring on automatically level of controller.
DETECTORS
Tab enables to preview status or values derived from the registered application of the radio detectors: temperature, illuminance, flooding,
motion, etc.
CONFIGURATION
Tab allows you to enter basic settings configuration associated with users, network parameters, the remote access, language settings, etc.
Limitations of the tabs: TRANSMITTERS / HOUSE/SCENES / TIMED OPERATIONS / DETECTORS
The maximum number of transmitters to define the tab without limitation TRANSMITTERS
Unlimited
Maximum number of devices to define tab HOME
Unlimited
Maximum time for waiting key code
during the cloning operation press ”END”
Maximum events (codes) creating a single stage
10
Maximum number of scenes can be defined in the tab without limitation SCENE
Unlimited
Maximum number of scenes in progress
20
Maximum events (codes) creating single TIMED OPERATIONS
10
Maximum number of functions can be defined in the tab TIMED OPERATION
– globally for all users
40
Setting delay time
0 to 99 sec
Settings until you press
0 to 99 sec
Maximum number of detectors to define the tab DETECTORS
50
Maximum waiting time for sensor code during operation of adding detectors
press ”END”
TECHNICAL SPECIFICATIONS
THE DESCRIPTION
Controller EFC-02 Mini after connec-
tion with the Wi-Fi router gives you the
opportunity to control all of the receir-
vers of EXTA FREE system from the
level of the mobile divice. Apart from
the function of ”virtual” transmitters
controller EFC-02 Mini has the possi-
bility of realization SCENES, THE TIME
FUNCTIONS and the preview state of
sensors. All functionality of controller is
included in the plastic case with leaded
atop the LED panel with signalizations.
A communication system carried out
with a receiver through a radio frequen-
cy of 868.32 MHz.The controller is con-
nected to the Wi-Fi router using a LAN
cable by completed RJ45 plug.Setting
and operation via the free application
installed on your mobile device. EFC-02
is designed for control within the local
network. Remote access is available
only to users who have constant access
to an IP address and has appropriate
redirections on the router.
THE APPEARANCE
The symbol stands for selective
collection of electrical and electronic
devices. Placing used devices with other
waste is not allowed
EFC-02 Mini
Nominal supply voltage: 5V DC / 1.2 A - standard of Micro USB
Nominal power consumption: 1.6 W
The type of battery to sustain the clock operation: CR2032
Durability of battery: 5 years
Communication system components of EXTA FREE: Radio f = 868 MHz, unidirectional
Total radio modules: 1
Range: Up to 250m in open area
Possibility to increase the range: Yes - via retransmitter RTN-01
Possibility to connecting an external antenna: No
Communication with mobile devices: 802.11 a / b / g / n - pursued through the
connection with the Wi-Fi router
Connectors: 1 x RJ45 Ethernet port, 1 x Micro USB B 2.0
Firmware upgradeable: Yes - via USB port
Remote sccess service: Only for users with fi xed external IP address
LEDs: 6 x LED
Operating temperature: -10 to + 55 ° C
Position: free
Protection degree: IP20 (EN 60529)
Protection class: III
Dimensions: 160 x 100 x 32 mm
Compliance with the standards: PN-ETSI EN 300 220-1, ETSI EN 300 220-2
COOPERATION WITH SEVERAL CONTROLLERS EFC-02
SWITCHING BETWEEN THE CONTROLLERS
● Application EFC-02 is prepared to work with a greater number of controllers working in the local network. Such situation is possible
in the case of large objects.
● The application automatically searches the start controllers working in a local network. If the number is bigger than> 1 it shows a list of active controllers.
Controllers are differentiated known by their names. User by pressing the ”Connect” selects the controller to which he wants to be logged.
● After selecting appears login window and then you need to enter ypur user name and password. If you already saved your login in the application it auto-
matically goes to the main window.
● For easy switching between several controllers working in the same local network server bookmark ”Switch Controller” available below the icon ”Configu-
ration”. Switching between controllers is available to users in the ”admin” and ”user”.
● The procedure is analogous to this as described in the ”Collaboration with several controllers.”
WARRANTY CARD
There is 24 months guarantee on the product
Salesman stamp and signature, date of sale
1. ZAMEL Sp. z o.o. assures 24 months guarantee for the product.
2. The manufacturer’s guarantee does not cover any of the following actions:
a) mechanical damage during transport, loading / unloading or under other circumstances,
b) damage caused by incorrect product mounting or misuse,
c) damage caused by unauthorised modifi cations made by the PURCHASER or any third parties to the product
or any other devices needed for the product functioning,
d) damage caused by Act of God or any other incidents independent of the manufacturer - ZAMEL Sp z o.o.
e) supply sources (batteries) included in the device during selling (if they are included).
3. The PURCHASER shall lay any claims in writing to the dealer or ZAMEL Sp. z o.o.
4. ZAMEL Sp. z o.o. is liable for processing any claim according to current Polish legislation.
5. ZAMEL Sp. z o.o. shall process the claim at its own discretion: product repair, replacement ormoney return.
6. The manufacturer’s guarantee is valid in the Republic of Poland.
7. The PURCHASER’s statutory rights in any applicable legislation whether against the retailer arising from the
purchase contract or otherwise are not affected by this warranty.
Error indicator SD card
Power connector
Indicator connection USB
RESET button - restore the factory settings
The indicator of receipt
Ethernet socket
Gear indicator (broadcast)
LAN switch indicator
Power indicator
