Setup Screen
Figure 5: Setup Screen: This screen displays the selection for unit system, upper boom shutoff
speed, display language setting and…
The Setup screen allows the operator to select or set operational parameters of the control screen,
including measurement unit system, boom shutoff speed, and display language setting.
To change a value on this screen, rotate the knob until the value of interest is highlighted by the
red box shown in the above figure, and press the knob to change the value. The color of the box
will change from red to white. When the desired value is reached, press the knob again to set the
value.
Training Manual
Zamboni FastICE
®
Training Manual
DK - 11001
Page 12 of 20
