19
En
g
lis
h
9. Ins
tall
a
t
io
n Gui
d
e
TNN 300
9
Installation Guide
1) Disassembling the TNN 300 Case and Components
①
As shown in the diagram, lay the TNN 300 down on a flat surface and open the left plate.
②
Install the door support bolt.
③
Separate the CPU case block cover and the six CPU heatpipes.
④
Remove the front heatsink and separate the three VGA heatpipes.
⑤
After removing the necessary blocks and heatpipes using a screwdriver, store them
in a safe place.
Left Plate
Bolts (PH M3x15)
CPU Case Block Cover
CPU Heatpipe
Hand Nut
Front Heatsink
VGA Heatpipe
VGA Case Block Cover
Bolts (PH M3x15)
