ZALMAN RESERATOR 2, Инструкция по установке и эксплуатации

Страница: 11 / 18

11
English
RESERATOR 2
※
The specifications of any product may change without prior notice to improve performance.
5. 6 Install the VGA Water Block (ZM-GWB3)
1) Refer to the manual included with the ZM-GWB3 for installation instructions.
2) If physical interference occurs while installing the Water Block, then stop the installation.
5. 5 Install the CPU Water Block (ZM-WB4 Gold)
1) Refer to the manual included with the ZM-WB4 Gold for installation instructions.
2) If physical interference occurs while installing the Water Block, then stop the installation.
5. 7 Connect the CPU Water Block and
the VGA Water Block
Connect the two Water Blocks with the PVC
Tube as shown in the diagram. Must install
the Tube Clamp
5. 8 Connect the VGA Water Blcok with
Reserator’s Base IN
1) Connect one end of the PVC Tube to the VGA Water Block Fitting and fasten with a
Tube Clamp as shown in the diagram. .
2) Pull out the PVC Tube through the I/O Bracket hole on the computer case.
3) Connect the Quick Coupling Insert that has been disconnected from the Degassing
Tube to the other end of the PVC tube, and fasten it with the use of Tube Clamp.
4) Plug the Quick Coupling Insert into the Reserator’s Base IN fitting.
PVC Tube
CPU Water
Block
VGA Water
Block
5. 9 Connect the CPU Water Block with the Base Out
1) Connect one end of the PVC Tube to the CPU Water Block Fitting and fasten with
Tube Clamp as shown in the diagram.
2) Pull out the PVC Tube through the tube hole of the I/O Bracket.
3) Connect the Quick Coupling Insert to the other end of the PVC Tube, and fasten with
Tube Clamp.
I/O Bracket
Base IN Quick Coupling Body
Quick Coupling Insert
All manuals and user guides at all-guides.com
all-guides.com