ZALMAN CNPS9500 AT Скачать руководство пользователя страница 8

The specifications of any product may change without prior notice to improve performance.

7

10. FAN MATE 2 Installation and Usage

1) Installing FAN MATE 2 on the Inside of the System      2) Installing FAN MATE 2 on the Outside of the System

Connect  the  appropriate  3-pin  connector  on  the 
cable  to  the  motherboard  fan  header  and  the
CNPS9500’s fan connector. 

Pull  the  6-pin  connector  out  of  the  system
through the back and connect it to FAN MATE 2,
which  should  be  installed  on  the  case  using  the
included double-sided tape (

).

When the speed control knob on FAN MATE 2 is turned fully counter-clockwise, the fan operates in 

Silent Mode. Turned fully clockwise, it operates in Normal Mode. You can select the desired fan speed 

by turning the knob.

Note)

FAN MATE 2 has been specifically designed for the fan of this product. 

Zalman Tech Co., Ltd. is not responsible for any damage to systems or CPUs caused by using it 

with other types of fans.

11. Notes on Usage

1) Checking CPU Compatibility

Please refer to “Compatible CPUs” on page 3 to confirm that your CPU is compatible before using the

CPU cooler.

2) Cautions During Booting

When  booting  the  computer,  it  may  automatically  power  down  after  an  alarm  sound  by  a  system 

monitoring  program  to  indicate  that  the  CPU  fan  is  rotating  slowly.  If  this  happens,  turn  the  speed 

control  knob  fully  clockwise  to  increase  the  fan  speed.  Then  set  ‘CPU  Fan  Detected’  to  ‘Disabled’  in

BIOS settings, or set the slowest rotational speed of the CPU fan in the system monitoring program to

less than or equal to 1300rpm.

Note)

Some motherboards do not boot if the rotational speed of the CPU fan is below a certain     

rpm.

If the BIOS settings are updated, Silent Mode can be used. For more information on updating

your BIOS, please refer to your motherboard manufacturer's website. Disabling CPU fan speed

detection in BIOS settings does not affect computer performance.

3) OVERCLOCKING

Zalman Tech Co., Ltd. is not responsible for any damage resulting from CPU OVERCLOCKING.

Fan Connector

(CNPS9500)

Motherboard

Double - sided Tape

FAN MATE 2

6-Pin Connector

All manuals and user guides at all-guides.com

Содержание CNPS9500 AT










Отзывы: