※
The specifications of any product may change without prior notice to improve performance.
5
2) Intel Pentium 4 - Socket 478
①
①
Install Clip
Refer to “How to Install the CNPS9500’s Clip” on page 3 to correctly install the clip (S - Type,
⑥
) on
CNPS9500.
②
②
Apply Thermal Grease
Clean off particles and residue from the top of
the CPU. Then spread the included thermal
grease (
②
) thinly on top of the CPU.
③
③
Install Clip Support for Socket 478
Install the two clip supports for Socket 478
(
⑩
) on both sides of the retention guide as
shown in the diagram.
④
④
Place Cooler
Insert two installation bolts for Socket 478 (
⑪
) into holes on the clip (S-Type,
⑥
) and place CNPS9500
at the center of the CPU. Using the L-wrench (
⑫
), fasten the bolts for Socket 478(
⑪
) into each hole
on the clip support for Socket 478(
⑩
) slightly at first. Then, fasten the bolts (
⑪
) in an alternating
manner until the clip (
⑥
) is completely pressed against the clip supports.
※
When installing CNPS9500 on a motherboard with
horizontally-oriented retention guide, take extra care
not to let the L-wrench (
⑫
) exert excessive force on
the fan.
If excessive force is exerted on the fan, it
may cause a malfunction.
⑤
⑤
Connect Power (Use FAN MATE 2)
◆
Please refer to FAN MATE 2 installation and usage on page 7.
Clip Support for
Socket 478,
⑩
Installation Bolt for Socket 478,
⑪
Clip(S-Type),
L-wrench,
CPU (IHS)
Thermal Grease
All manuals and user guides at all-guides.com
all-guides.com
