※
The specifications of any product may change without prior notice to improve performance.
6
①
①
Nipple Installation
Place a small washer on the motherboard. Then, put a nipple over it and fasten the nipple until the
Backplate for AMD64 is firmly attached to the motherboard on the opposite side of the CPU.
* A Retention Guide is not necessary for installing CNPS7700 LED on Socket 754/939/940.
③
③
Installation of Grips and Bolts
Interlock the L-Type grips with the clip. Insert the two bolts
into the outer holes of the grips.
④
④
FHS Placement
Set the FHS at the center of the CPU. Screw the bolts
in slightly, and then tighten each bolt a few turns at a
time while alternating between the two until the Grips
are completely pressed against the Nipples.
⑤
⑤
Connect Power (Use FAN MATE 2)
◆
Please refer to FAN MATE 2 Installation and Usage on page 7.
②
②
Thermal Grease Application
Clear off particles and residue from the top of the
CPU then spread a thin layer of the included thermal
grease thoroughly on top of the CPU.
Bolt
Grip (L-Type)
Outer Hole
Grip (L-Type)
Nipple
3) AMD Sempron/AMD64 - Socket 754/939/940
CPU (Lid)
Thermal Grease
Backplate for AMD64
Nipple
Motherboard
Small Washer
All manuals and user guides at all-guides.com
