Rev.7a (for units from ser.no. 51053/built 2010) 26.01.2010 This document substitutes previous versions page 34 of 34
Zähl Elektronik-Tontechnik • Odenthaler Str. 47 • D-51465 Bergisch Gladbach • [email protected] • www.zaehl.com
Distributor (National/International):
sono Studiotechnik GmbH • Haagerstraße 5 • D-81671 München • Tel. +49 89 419671-0 •
•
www.sono.de
AIRCOM Manual
You may supply relays and lamps directly from the 0V/5V pins of the REMOTE GPI/AUDIO connector.
The same applies for the GPI OUT/REMOTE OUT and the MASTER GPI OUT connector.
Consider that the overall maximum current must not exceed 250mA. When loading the unit’s 5V pins
with 250mA, voltage will drop to approx. 4,3V.
10.9.
Lamp Supply/USB
Important: Follow all warnings and hints given in chapter 3.4
This output (designation “DC ONLY”) delivers 5 Volt DC nominal. It may be exclusively used for
supplying a standard 5V LED Lamp with USB connector (commercially available with gooseneck). It may
be loaded to a maximum current of 250mA, whereas the voltage will drop to approx. 4,3V.
Never connect any active electronic components to this connector.
11.
Measures and Weights
11.1.
AIRCOM Unit
enclosure
plastic material desk console, EMC coated
front panel / rear panel
clear anodised aluminium
overall measure W x H x D
295 mm x 110 mm x 215 mm
height of front panel at front
43 mm
height of front panel at rear
90 mm
weight
approx. 2,6 kg
11.2.
Power Supply
measure W x H x D
120 mm x 55 mm x 37 mm
weight
0,4 kg
length of fixed cable (DC to unit) approx. 1,6 m
length of mains cable
1,5 m - 2,0 m
11.3.
Delivery form
cardboard box
approx. 500 mm x 340 mm x 220 mm
gross weight
approx. 4,75 kg
