Zafferani Glas VELOX MASTER 4M/22, Руководство пользователя

Страница: 6 / 19

VELOX MASTER 4M/22 ZAFFERANI GLAS S.R.L – ITALY 6
MAS4ing001.doc06/04/09
INSTALLATION AND ELECTRIC CONNECTIONS
After having chosen the place of installation in your factory, bearing in the mind the
necessary space for operations, position the machine making sure of its level. If the
machine is to be positioned near to a wall allow enough space behind for the
periodical necessary maintenance. To avoid unnecessary ugly piping in the factory
ensure that the necessary inlet and outlets for the eaters are provided. About electric
connections verify, before all, that the voltage of your factory corresponds to the
voltage of the machine. Starting from the control box connect the machine to a fuse-
board of right amperage. It is also necessary to earth the machine. Check all relevant
points for possible short circuits which could damage the machine's electrical parts.
ADJUSTMENT OF THE MACHINE
Before functioning the machine ensure that all parts including transport bench are in
place as per instructions.
Checking the electric connection verify if the spy is on and if the rotation of motors
(motors of the wheels and not of the track) is right; in case of wrong rotation invert
only elecrtic general cables (R-S-T). Ensure that the water in the external sink is at
the correct level and that water is pumped to the wheels.
In case you use direct water, be sure that it is enough.
After these simple operations using the handle-wheel (10) adjust the track according
to the thickness you want to machine. Adjust all the pointers (3) and (4) of the
diamond an polishing wheels according to the thickness.
Lower all the wheels by the handle-wheel (5). Start the machine with a glass inside
and slowly raise the wheels by the handle (5) up to the wheels touch the glass.