Figure 3:a
Adjusting your Half Cage
Figure 3:b
Mounting Half Cage
Figure 3:c
Operating Half Cage
Figure 4:a
Mounting your Recoil Handle
Additional Recoil Options
Sold Separately
Figure 4:b
Operating your Recoil Handle
The jaws can be moved to either end of the handle or rotated 90 degrees
to help position the handle and/or accessories in a balanced position.
Rod lock for Zamerican
Arms, EVF Mounts,
or 15 mm rods
Coldshoe Jaws for
shoe accessories.
Threaded
Accessories
Remove allen screw and
jaws connected to handle.
Align jaws with rear mount,
and tighten allen screw in place.
1
2
(Docu & Indie Kit)
(Indie Kit)
(Indie Kit)
(Indie Kit)
(Indie Kit)
(Indie Kit)
?
See front figure for full correct Assembly
Check out our tutorial videos at zacuto.com
For additional accessories visit store.zacuto.com
NEED
MORE
HELP
To change the angle of the Zwivel 2, loosen
levers and rotate. To lock, tighten lever until
pins lock into center wheel. Both halves can
be independently rotated a full 365 degrees.
Loosen tightening lever on the top of the grip
to adjust the grip’s position. Re-tighten lever
when in desired position.
Figure 2:a
Operating
Z-Grip Z-Mount Zwivel
Tall
Short
Medium
1
2
Loosen top tightening lever and insert
Zamerican arm into 15mm rod port.
Adjust the height of the your Half Cage
on the handle side with the
5/32 allen wrench.
Loosen allen screws and slide top rail
or Z-Rail jaws to desired position and
retighten allen screws.
For a more extended configuration the
bottom allen screws will need to be
removed and relocated.
(See figure to the right labeled Tall.)
1
Mount the Half Cage to the side mounted
Z-Rail on your VCT Universal Plate
Loosen Racheting Lever and slide
Half Cage jaws onto Z-Rail.
Retighten racheting lever when
in desired place.
1
2
The rod port on the side of the half cage can be used for Zamerican Arms.
Retighten lever when in place.
Mounting Axis Mini to Recoil Handle.
Mounting Z-Drive and Tornado
to VCT Rods
2
