Z3 Technology ZEUS DME-10-G Скачать руководство пользователя страница 32

Страница: 32 / 73

DOC-USR-0214-04

___________________________________________________________________________________________

Z3 Technology, LLC

♦

100 N 8

ST, STE 250

♦

Lincoln, NE 68508-1369 USA

♦

+1.402.323.0702

For more information on testing and verifying FEC using a Z3 Technology decoder with Pro-MPEG FEC
support, please contact your Z3 sales account manager for additional user instructions.

Encoding KLV Stream

The DME-10-G is STANAG 4609/NGA MISP compliant and can place KLV data from the SDI ancillary data

in a UDP stream.

Return to the user interface.

Select “HD

SDI” from the Video Source drop down.

Select “UDP” from the Output Format drop down.

Select “TRUE” from the KLV Enable drop down. This will reveal the KLV Pid, KLV Bitrae, KLV Mode,

and KLV source settings.

Set the desired PID value (Most applications will dynamically find any PID with KLV). The default

KLV bitrate of 1000 bps is usually sufficient. If a higher data rate is expected set the bitrate

higher.

Set the KLV Mode to “SDI”. The other positions are “FILE” and “SERIAL”. “FILE” will take a binary

file of capture KLV data as it’s source and “SERIAL” configures the unit to captur

e KLV via serial

(see section 6.19.1)

With SDI selected a gv7601 device will need to be entered as the source. On the DME-10-G, the only

available gv7601 device is “/dev/gv7601.0” so enter this for the KLV Source.

Click the Start button and video will be streamed with KLV data.

Содержание ZEUS DME-10-G










































































Результаты поиска

Содержание ZEUS DME-10-G

Отзывы:

Похожие инструкции для ZEUS DME-10-G

Бренды по названию

Популярные бренды

Z3 Technology ZEUS DME-10-G, Инструкция пользователя

Результаты поиска

Содержание ZEUS DME-10-G

Отзывы:

Похожие инструкции для ZEUS DME-10-G

Бренды по названию

Популярные бренды