9
CONFIDENTIAL
DOC-USR-0056-02
____________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
6.3
Turn on the Z3-HE4K-01
(6)
Turn on the power switch.
(7)
You should see the power LED turn on. After about 5 seconds you should see LEDs 1 and 2 blink on
and off for a few seconds. 4K initialization and setup then starts. After about 40 more seconds,
you will see LED 2 turn green. This indicates the Z3-HE4K-01 is ready to run (note: If LED 2 is
blinking, this indicates the encoder has autostarted and is currently encoding).
6.4
Find the Z3-HE4K-01 on the Network using ZFinder
(8)
Make sure your Windows PC is connected to the same network in which the Z3-HE4K-01 is connected
to.
(9)
Run the “ZFinder” PC Utility on your Windows PC. The ZFinder window appears. ZFinder does a scan
of the network and lists the location of all Z3 systems connected to the network. In this case, the
Z3-HE4K-01 appears:
Figure 6 ZFinder with Z3-HE4K-01 Listed
(1) Turn on
switch
(2) Power LED
Turns
(3) LED1 and LED2 blink
for a few seconds
(4) LED2 turns green
Figure 5 Turning the Z3-HE4K-01 On
