CONFIDENTIAL
Z3-DM8169-VI-RPS
___________________________________________________________________________________________
V1.03.00
Z3 Technology, LLC ♦ 100 N 8
th
ST, STE 250 ♦ Lincoln, NE 68508-1369 U.S.A. ♦ +1.402.323.0702
18
7.2 Encode & Stream with Z3-MVP-02 Decode (RTP ONLY)
The encode and stream to Z3-MVP-02 demo can support inputs from HDMI and 3G SDI. The connections are
labeled below.
The video source (we use a Brite-View box, Model: BV-5005HD Mini CT) must be a NON-HDCP source for
HDMI input. In order to test 3G SDI, you will need a HDMI to 3G SDI converter (we use a TV One converter,
Model: 1T-FC-766).
First, control the Z3-DM8169-VI-RPS system via serial port on Z3-DM8169-MOD.
1.
Plug-in serial cable
and NULL modem connector
from Z3-DM8169-MOD to PC’s COM port
2.
Setup teraterm on PC for 115k, 8, N, 1, 0ms/char, 100ms/line
3.
Connect the other end of the serial cable to the console port on Z3-DM8169-MOD board
The console port is the 2.5mm jack next to the power switch
4.
Connect power supply to Brite-View Box
5.
Connect USB stick with content to Brite-View Box
6.
Set Brite-View Box to play videos at 1080p60
7.
Connect HDMI out of Brite-View Box to the HDMI in of the TV One 3G SDI converter
8.
Connect 12V Power supply to the Z3-DM8169-MOD
*Before powering up the Z3-DM8169-VI-RPS system, make sure the Brite-View Box and TV One
converter are running
9.
Connect Ethernet cable from Z3-DM8169-VI-RPS to Z3-MVP-02
10.
Open up a console window
11.
Power on the Z3-DM8169-VI-RPS system
Top: Pb In
Bottom: Pr In
Top: SDI In
Bottom: Y In
Top: SDI Out
Bottom: ASI Out 2
Top: ASI In
Bottom: ASI Out 1
Stereo Analog Jacks
HDMI In
Serial
