CONFIDENTIAL
DOC-USR-0055-03
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
31
Figure 18 shows the suggested values for Maximum Delay and Number of B-frames for three common
use cases:
Maximum Delay
# of B-frames
Case 1: Highest Quality, Highest Latency
3000
2
Case 2: Good Quality, Standard Latency
2000
1
Case 3: Normal Quality, Lowest Latency
100
0
Figure 18 Tuning for Various Use Cases
7.12
Running DHCP
DHCP is also supported. When enabled, the Z3-DM8107-SDI2-RPS dynamically receives an IP address to
use at startup. The IP address that is assigned can be seen either through the serial interface or
through the ZFinder tool running on a PC. To view how DHCP support works, see the following steps:
(31)
The first thing you need to do is set up a custom configuration so that the DHCP setting is used the
next time the system boots up. To do this, click on the “User Presets” tab and click on “new”:
(32)
This brings up a new text box to enter the preset name. Type “z3_test” and click “ok”:
(1) Click here to select “User Presets”
(2) Click here to set a new preset
Figure 19 The User Presets Tab
Figure 20 Entering a User Preset Name
(1) Click on “User Presets” Tab
(2) Click on “new”
(1) Type “z3_test”
(2) Click “ok”
