31
CONFIDENTIAL
DOC-USR-0101-01
____________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
8.3
Changing the IP Address via the HTTP-based User Interface
To set your unit to a different static IP address, complete the following steps:
The first step is to set up a custom configuration so that the manual networking settings are used the
(1)
next time the system boots up. To do this, see Section 8.1.
Select your newly created configuration from the “preset” dropdown menu at the bottom of the
(2)
screen. As soon as you select your configuration, the screen will reload.
Return to the System Setup tab.
(3)
Enter in your desired network settings including “Local IP Address”, “Local Netmask”, “Default
(4)
Gateway”, “DNS Server IP 1”, and “DNS Server IP 2”.
Click on the “Save” button.
(5)
(1) Click here to select “User
Presets”
(2) Click here to set a new preset
(2) Click “Save”
Figure 22 Saving Updated Network Settings
(1) Enter New IP Address
and desired network settings
