19
CONFIDENTIAL
DOC-USR-0101-01
____________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
*Note:
The first two parts need to be the same based on the netmask set to
255
.
255
.0.0. If
netmask were
255
.
255
.
255
.0, for example, then the first three parts of the IP address would have
to be the same.
After you are done, make note of the address your PC is set to. This will be important in the
(8)
streaming step.
7.5
Run the HTTP-based User Interface to Configure Channel 1 for Streaming UDP
The following actions can be completed in either the serial interface or an HTTP-based interface run on
a web browser. For ease of use, the HTTP-based interface is described.
Open an Internet browser window on your PC (for best results, FireFox or Chrome are recommended)
(9)
and enter the IP address of the RPS (192.168.0.120 by default) into the URL text box. The HTTP-
based graphical user interface (GUI) appears at the CH1 tab.
Note:
Settings in the user interface cannot be changed if the unit is currently encoding.
Click the red “Stop” button at the bottom of any screen to stop any current encoding.
(10)
At the CH1 tab, verify the “Video Source” is set to “HDMI” using the dropdown menu. Always select
(11)
HDMI to accept video from the Sony FCB-ER8300.
Change “Output Resolution” to “Follow Input”.
(12)
Select the codec you would like to use for your encoding. Both H.265/HEVC and H.264/AVC are
(13)
supported. In the pictured example, verify “Video Codec” is set to “H265(HEVC)”.
Set “Output Format” to “UDP”.
(14)
You can set “Dest Address” to:
(15)
(a)
the IP address of your PC that will be running VLC media player (in the pictured example,
192.168.0.6).
(b)
or to a multicast address (An example multicast address would be “225.1.2.3”. If you are
on a shared network, check with your Network Administrator.)
Also make note of the value of “Dest Port” (8600 by default).
(16)
Click the green “Start” button.
(17)
