8
HE4K-DCK-10
HARDWARE SPECIFICATION
CONFIDENTIAL
DOC-USR-0100-01
____________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
PHYSICAL
3.0
The HE4K-DCK-10 is comprised of three PCBs:
Interface Front End PCB
o
This board contains the interface with the Sony FCB-ER8300 camera block. The ER8300
connects directly to the KEL connector with a KEL cable provided.
An optional Micro HDMI input jack can be present. If so, this jack will accept video and audio
from an external HDMI source as long as the signal is not encrypted with HDCP.
Main Encoder PCB
o
This board contains the CPU and is the core of the encoder. This PCB also includes a Micro-SD
card socket. Some versions of the Main Encoder PCB also contain a 2.5mm circular jack used
to access the CPU console port, useful to load initial software and for debug.
I/O Jack and PoE PCB
o
This board contains all the I/O jacks as well as the optional PoE (power over Ethernet)
circuits. Some versions of this PCB contain a 2.5mm phone-style jack for the serial console
port of the CPU. This PCB contains the ESD and surge protection as required for each I/O
type.
All three boards measure 58 x 58 mm, 1.6mm thick and are designed to be stacked, allowing for a very
compact mechanical assembly. The diagram below shows the physical arrangement of the three boards
mounted on a chassis together with a Sony FCB-ER8300 camera block.
Figure 2: HE4K-DCK-10 Physical Block Diagram (Chassis & Camera Not Included)
