20
HE4K-DCK-10
HARDWARE SPECIFICATION
CONFIDENTIAL
DOC-USR-0100-01
____________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
37 GND
38 N/C
39 MIPI1_D1P
40 GND
41 MIPI1_D1M
42 N/C
43 GND
44 N/C
45 MIPI1_CKP
46 GND
47 MIPI1_CKM
48 N/C
49 GND
50 N/C
51 MIPI1_D0P
52 GND
53 MIPI1_D0M
54 +12V Power
55 GND
56 +12V Power
57 MIPI1_D2P
58 +12V Power
59 MIPI1_D2M
60 +12V Power
61 GND
62 GND
63 MIPI2_D3P
64 N/C
65 MIPI2_D3M
66 N/C
67 GND
68 N/C
69 MIPI2_D1P
70 UART2_TXD
71 MIPI2_D1M
72 UART2_RXD
73 GND
74 GND
75 MIPI2_CKP
76
I2S_LRCLK / IR_CUT_0_CONTROL1 /
GPIO0_7
77 MIPI2_CKM
78
I2S_SCLK / IR_CUT_0_CONTROL2 /
GPIO0_5
79 GND
80 I2S_DAT / DC_IRIS_PWM / GPIO0_4
81 MIPI2_D0P
82 N/C
83 MIPI2_D0M
84 +3.3V
85 GND
86 +3.3V
87 MIPI2_D2P
88 +3.3V
89 MIPI2_D2M
90 +3.3V
Table 10 Main Encoder PCB J7 Pin Out
7.2.3
J10 – Micro SD Card
J10 is a socket for a standard micro SD card.
7.2.4
J23 – Ethernet PHY
This header provides access to the Gb Ethernet PHY on board the Main Encoder PCB. It mates with
J22 on the I/O Jack PCB. The pin assignments are below.
The initial prototype board set uses a 12x1 connector, while future versions will use a 2x8 connector.
