58
DOC-USR-0264-05
____________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
15.5
The CH2 & CH3 Tabs (Channels 2 & 3)
The Z3-FVXK/FSDI-13A-RPS supports simultaneous encode into multiple different resolutions and
bitrates. Each output stream can be set using a separate Channel tab. See the CH1 Tab section for
detailed descriptions of available settings on the CH2 and CH3 tab. If these tabs are not present, you can
create a them by clicking on the “+” tab. Only three channels are supported.
CH2 Default:
Parameter
Options (default in bold) Description
Encoder Setup
Output Resolution
320x180
–
12560x1440
(1280x720)
Follow Input
The encode resolution. If this resolution is different
from the capture resolution (3840x2160), resizing
will occur.
CH3 Defaults:
Parameter
Options (default in bold) Description
Encoder Setup
Output Resolution
320x180
–
12560x1440
(720-480)
Follow Input
The encode resolution. If this resolution is different
from the capture resolution (3840x2160), resizing
will occur.
Video Bitrate
2K
–
40M (
2M
)
Textbox for entering video bitrate.
15.6
Values Appearing at the Bottom of All Tabs
Parameter
Options (default in bold)
Notes
preset
encoder
(any user-defined profiles)
--- new preset ---
The preset configuration file selected for use.
encoder = factory defaults
Create more profiles by
selecting “
--- new
preset ---
“
.
Save Button
Click to save preset value to the selected
configuration.
Stop All Button
Stop all current encode sessions. Encode must
be stopped in order for settings to be altered.
Start All Button
Start all encode sessions.
system status:
OK
