21
DOC-USR-0264-05
____________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
11.2
Via USB using AmbaUSB
11.2.1
Required Software
●
AmbaUSB v4.3.2 (Linux and Windows are both supported)
●
Full release image (bst_bld_kernel_lnx_release.bin, you can extract it from the SW-AS
x
-
yyyy
-
zz
_FV2K-13A-images.tar.bz2)
●
Terminal emulator (minicom for Linux, TeraTerm/PuTTY for Windows)
11.2.2
Required Equipment
●
USB Male A to USB Male A Data Cable
(example:
https://www.amazon.com/dp/B002KKZRYM
).
Figure 9 USB Male A to Male A
Both ends should be plugs.
Make sure it is
not
an “extender” cable with a
receptacle end.
●
AmbaUSB v4.3.2 (Linux and Windows are both supported)
11.2.3
Programming Board
1)
Open the AmbaUSB application.
2)
Change the “Board’s Config” drop
-
down to “LINUX.CV22.LPDDR4.NAND”.
3)
Hit the “Firmware” Find button, and navigate to the bst_bld_kerne
l_lnx_release.bin file.
