Z-World RabbitLink EG2100, Руководство пользователя

Страница: 5 / 48

User’s Manual 1
1. I
NTRODUCTION
This chapter introduces the RabbitLink Network Programming Gateway and describes its features.
Rabbit-based embedded systems are normally programmed using a direct connection between a
PC and the programming port of a Rabbit-based embedded system. The RabbitLink provides an
indirect connection between the two for remote downloading and debugging.
Figure 1. Remote Network Access via RabbitLink Network Gateway
1.1 RabbitLink Features
• Rabbit 2000
™
microprocessor operating at 22.1 MHz.
• One RJ-45 Ethernet port compliant with IEEE 802.3 standard for 10Base-T Ethernet protocol.
• Two serial ports.
• Three status LEDs—download, link, and active.
• Optional plastic enclosure and LED light pipes (enclosure and light pipes are included with the
tool kit, and are also sold separately).
• 128K static RAM and 512K flash memory (two 256K flash chips).
• Firmware already installed ready to run, easy setup with DHCP or simple console commands.
• Password protection—password prompt each time a new Dynamic C session is initiated with the
RabbitLink.
• Remote program downloading and debugging.
Ethernet/
Internet
RabbitLink
Board
Rabbit-based
embedded system
Programming Port
Ethernet Port