2.2 List of applicable FCC rules
FCC Part15 Subpart C, Section 15.24
9
2.3 Summarize the specific operational use conditions
The information in this article, including the URL for reference, if there is any change,
without prior notice. Documents are provided by the current version without any guarantee
responsibility, including merchantability, suitable for any particular purpose or non-
infringement guarantees, and any guarantees presented by any proposal, specification, or
sample mentioned elsewhere. This document has no any responsibility, including the use
of the information within this document produced by the infringement of any patent rights.
This document in this, by estoppel or otherwise, grant any intellectual property licensing,
whether express or implied license.
The Z-Wave marks shall be owned by the Z-Wave Alliance.
All the mentioned brand names, trademarks and registered trademarks presented in this
document are the property of their respective owners, and hereby declare.
It is suggested not to place devices closer than 20 cm from other RF transmitters. Doing
that might result in interference and decrease of radio range.
FCC regulatory information:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Warning: changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
End Device Labeling
Please notice that if the FCC identification number is not visible when the module is
installed inside another device, then the outside of the device into which the module is
installed must also display a label referring to the enclosed module. This exterior label
can use wording such as the following: “Contains FCC ID:
2ALIB-ZMERAZBERRY7A
” any
similar wording that expresses the same meaning may be used.
RF Exposure Compliance
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of
20cm between the radiator & your body. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
FCC Part 15B Compliance of End Device
The OEM integrator is responsible for ensuring that the host product which is installed and
operating with the module is in compliant with Part 15B unintentional Radiator
requirements, please note that For a Class B digital device or peripheral, the instructions
