6
Zone Control
The HSK-100Z enables you to control single or multiple Z-Wave
devices with the press of a button. For example, you can group all
your bedroom lights together so that all of them will turn on with the
press of a button.
You can control up to 8 zones with your HSK-100Z. Each zone
supports up to 232 Z-Wave devices.
Zone Setup
Including Device to a Zone
Step
Setup Key
Setup LED Behavior
1
Press
in Zone
Setup area
OK LED on
LED A blinks slowly
2
Select a zone group
number from 1 to 8
LED A off
LED B blinks slowly
3
Press the program
button on the target
device
OK LED blinks once then
turns off
LED B off
Zone setup completed
Note: If you cannot add your Z-Wave device, this device might have
been included in another Z-Wave network. In this case, please delete
this device following the steps in the [Deleting a Device from the
Network] section then add this device again.
