Z-Wave Aeotec 7 Pro, Руководство пользователя, Страница: 7 / 13

Z-Wave products are supposed to work out of the box after inclusion, however certain configuration can
adapt the function better to user needs or unlock further enhanced features.
IMPORTANT: Controllers may only allow configuring signed values. In order to set values in the range
128 ... 255 the value sent in the application shall be the desired value minus 256. For example: To set a
parameter to 200 it may be needed to set a value of 200 minus 256 = minus 56. In case of a two byte
value the same logic applies: Values greater than 32768 may needed to be given as negative values too.
Parameter 1: Sensor Operation Mode
This parameter defines if the internal magnet sensor or the external terminal input is detected and used to
issue alarm notification. The other sensor input the deactivated. If the parameter is set to 1, the scene
activation for the external terminal input will be deactivated.
Size: 1 Byte, Default Value: 0
Setting Description
0 Internal Magnet Sensor Used and scene activation enabled
1 External Terminal Inputs Used and scene activation disabled
Note: Quick press the button 5 times, which can also toggle parameter 1 setting value from 0/1.
Parameter 2: Dry Contact Operation Mode
This Parameter defines how dry contact will operate with the sensor or switch that is connected to the dry
contact terminals.
Size: 1 Byte, Default Value: 0
Setting Description
0 NO Toggle / Follow state will follow the input of the dry contact terminals
where OFF is CLOSED, and ON is OPEN.
1 NC Toggle / Follow state will follow the input of the dry contact terminals
where ON is CLOSED, and OFF is OPEN.
2 NO save state will allow state of sensor to toggle OPEN/CLOSE based on
OFF to ON signal.
3 NC save state will allow state of sensor to toggle OPEN/CLOSE based on
ON to OFF signal.
Parameter 3: Door/window state
This parameter allows to set in what state is door/window when the magnet is close to the sensor.
Size: 1 Byte, Default Value: 0
Setting Description
0 Closed when Magnet near
1 Opened when Magnet near
Parameter 4: Visual LED Indications