Z-Wave.Me ZME_05459, Быстрый старт

Страница: 6 / 8

De nes which command should be sent on button single press or hold. Basic and Scene Activation commands are sent to Association group.
Use Scene Controller Conf to set up Scene ID for Scene Activation. Switch All commands are sent broadcast.
Value Description
0 Disabled
4 Switch On/Off and Dim (send Basic Set and Switch Multilevel) (Default)
1 Switch On/Off only (send Basic Set)
2 Switch All
3 Send Scenes
5 Send Precon gured Scenes
Action on button double press or hold (Parameter Number 14, Parameter Size 1)
De nes which command should be sent on button double press or press-hold. Basic and Scene Activation commands are sent to Association
group. Use Scene Controller Conf to set up Scene ID for Scene Activation. Switch All commands are sent broadcast. If not disabled, the device
will wait for a click timeout to see if the second click would be pressed. This will introduce a small delay for single click commands
Value Description
0 Disabled (Default)
4 Switch On/Off and Dim (send Basic Set and Switch Multilevel)
1 Switch On/Off only (send Basic Set)
2 Switch All
3 Send Scenes
5 Send Precon gured Scenes
Send the following Switch All commands (Parameter Number 15, Parameter Size 1)
Value Description
1 Switch off only (Default)
2 Switch on only
255 Switch all on and off
What to do on button Down press (Parameter Number 16, Parameter Size 1)
De nes how to interpret button Down press. Depends on "Switch by buttons" parameter. If not Disabled this parameter will affect the action
selected by the latter parameter. Can be used in conjunction with Auto Off function.
Value Description
0 Close (Default)
1 Open if closed else close
2 Open
Action on Auto open or close function (Parameter Number 17, Parameter Size 1)
Value Description
0 Close blinds (Default)
1 Open blinds
Command Classes
Supported Command Classes