Z Microsystems GCS17T Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 34

Z Microsystems GCS17T Скачать руководство пользователя страница 21

27-0043UM REV A 03/10

21

no main Display image

If the cable from the computer to the display is secure, determine the color of the standby
LED and follow the appropriate procedure below.

Black

Cause:
If the status LED is black, unit is on standby or there is no power to the unit.

Recovery:

• Press and hold standby button.

• Ensure the power cable is plugged into the source.

• Connect the power cable to a AC outlet. Ensure the AC outlet is active.

• Wake up the display by pressing the standby button.

amber

Cause:
If the status LED is orange, there is no video signal.

Recovery:

• If Video 1 or Video 2 is selected, ensure there is a video signal coming into the

selected channel.

• Ensure there is a video signal coming from the computer.

Green

Cause:
When the standby LED is green, there is both power and a video signal. If there is no
image on the main display, there is a possible hardware failure.

Recovery:

• Ensure the video signal coming from the computer is not a black screen.

• Contact Z Microsystems’ Customer Support Department.

troUBLESHootinG tHE GCS SEriES

troUBLESHootinG

«
...
19
20
21
22
23
...
»

Содержание GCS17T



































Отзывы:

Нет отзывов